How to use in-sentence of “flux”:
– The flux lines can be seen by placing iron filings over a magnet.
– Magnetic fields can illustrated by magnetic flux lines.
– Magnetic flux is what generates the field around a magnetic material.
– Each type of flux has its own distinct unit of measurement along with distinct physical constants.
– These included Flux Of Pink Indians, Conflict Conflict, Zounds, Honey Bane, Rudimentary Peni and others.
– Welding flux may be used in a solid, liquid, or paste form.
– The flux is defined as the quantity of fluid flowing through “S” in a unit amount of time.
Example sentences of “flux”:
- The SI unit of magnetic flux is the Weber.
- A calculation shows that this value of the flux would cause on an absorbing surface to experience 4.6 µPa of radiation pressure.
– The SI unit of magnetic flux is the Weber.
– A calculation shows that this value of the flux would cause on an absorbing surface to experience 4.6 µPa of radiation pressure.
– Limestone is the usual flux for this purpose.
– The magnetic flux through a closed surface is always zero.
– If absorbed, the pressure is the energy flux density divided by the speed of light.
– The concentration of flux in low-reluctance materials forms strong temporary poles and causes mechanical forces that tend to move the materials towards regions of higher flux so it is always an attractive force.
– Its flux was known to be above 10 eV.
– Also, the flux is always making the pocket of gas which keeps the electric arc from going out.
– This causes the magnetic flux to change.
– A change in flux of one weber per second will induce an electromotive force of one volt.
– Magnetic flux is represented by the symbol is the unit for area.
– Electrical flux has SI units of volt metres newton metres squared per coulomb.
– A magnetic field line or magnetic flux line shows the direction of a magnet’s force and the strength of a magnet.
– When the flux changes, it produces electromotive force.
– Upon creating their own label, Spiderleg, Flux of Pink Indians resurfaced in 1982 with the album “Strive to Survive Causing Least Suffering Possible”.
– The iron filings will get attracted to the magnet and move into the shape of the flux lines.
– The typical design of the “heat flux DSC” can be seen from Figure 1.
– It is also used in fiberglass, as a flux in metallurgy, slime, and as an insecticide.
– So, the SI base units of electric flux are kg•m.
More in-sentence examples of “flux”:
– After welding, the flux solidifies.
– This illustration implies that if the vector field is tangent to “S” at each point, then the flux is zero, because the fluid just flows in parallel to “S”, and neither in nor out.
– This is because the liquid flux is protecting the hot metal and it will not blow away.
– A radiometer or roentgenometer is a device for measuring the radiometryradiant flux of electromagnetic radiation.
– The changing magnetic flux generates an electromotive force.
– Electric fields are caused by electric charges, described by Gauss’s law, Purcell, p 25: “Gauss’s Law: the flux of the electric field E through any closed surface…
– In the field of electromagnetism, flux is usually the integral of a vector quantity over a finite surface.
– The two most common types of differential scanning calorimeter, are “heat flux DSC”, which operates by keeping the heat supply to the system as constant and “power-compensated DSC”, which works by maintaining the power supplied to the calorimeter as constant.
– It can also calculate the magnetic flux through a surface.
– You then look at the shape of the iron filings and see the gap between the flux lines.
– The time machine needs plutonium to provide the power for the flux capacitor.
– Michael Faraday found that an electromotive force is generated when there is a change in magnetic flux in a conductor.
– Undulators can provide hundreds of time more magnetic flux than a simple bending magnet and as such are in high demand at synchrotron radiation facilities.
– The heart of the time machine is “the flux capacitor” invented by Dr.
– The outer edges of the Sun’s corona are constantly being blown away by the open magnetic flux generating the solar wind.
– The “r” process is thought to occur in supernova explosions because the conditions of high temperature, high neutron flux and ejected matter are present.
– The closer the flux lines are to each other, the stronger the magnet is.
– This principle is also shown by Lenz’s law, which states that a changing magnetic flux will produce an opposing magnetic flux in any nearby metals.
– It is as though nature, through this induced field, tried to compensate for the reduction in the flux due to the applied field “B”.
– Electric flux is not affected by charges that are not within the closed surface.
– Solder used in electronic equipment and for many other purposes has a flux to help clean the material that is soldered.
– Magnetic flux always forms a closed loop, as described by Maxwell’s equations, but the path of the loop depends on the reluctance of the surrounding materials.
– It is different from flux because there is no liquid on the weld.
– This layer of solid flux is called slag, and must be removed from the weld.
- After welding, the flux solidifies.
- This illustration implies that if the vector field is tangent to "S" at each point, then the flux is zero, because the fluid just flows in parallel to "S", and neither in nor out.
- This is because the liquid flux is protecting the hot metal and it will not blow away.
– The total reluctance is equal to the ratio of the “magnetomotive force” in a passive magnetic circuit to the magnetic flux in this circuit.
– The flux through this circuit is decreasing in the outward direction.
– In the study of transport phenomena, flux is defined as flow per unit area, where flow is the movement of some quantity per time.
– If the electric flux density does not change very fast, the second term on the right hand side is very small and can be left out, and then the equation is the same as Ampere’s law.
– The weber may be defined in terms of Faraday’s law of inductionFaraday’s law, which relates a changing magnetic flux through a loop to the electric field around the loop.
– He developed important ideas on the quantization of magnetic flux in metals.
– Welding that uses flux is easier to do outside when it is windy.
– Magnetic flux is sometimes used by electrical engineers designing systems with electromagnetelectromagnets or designing dynamos.
– This law states that the amount of heat energy passing through a small portion of an area of a material, which is called heat flux density and denoted by.
– The flux changes when B changes or when the wire loop is moved or bent, or when both happen.
– Ores are not pure, so a flux is added to carry away the impurities.
– The electric flux is defined as EdAcos.
– Thus, as the current due to the battery builds up, there is a changing magnetic flux through the coil and this must result in an induced emf in the coil.
– The Laplacian represents the flux density of the gradient flow of a function.
– In physics, the magnetomotive force is the force in any magnetic circuit that makes the magnetic flux to flow through the circuit.
– Some solders have a flux core, where the flux is inside the solder.
– The strength of a magnet has to do with the spaces between the magnetic flux lines.
– She has been in movies like Æon Flux and Creature Unknown.
– The mineral was also used as a flux to solder precious metals together.
– This equation says that how much current is induced in the wire loop depends directly on how fast the magnetic flux is changing in time, whether due to the loop moving or the magnetic field changing.
– During welding, the flux will melt and some of it will evaporate.