Polymerization In Sentences - Examples Of Polymerization In Sentences

Search your words in sentences https://englishteststore.net/index.php?option=com_content&view=article&id=20211&Itemid=1131 - Polymers, both natural and synthetic, are created via polymerization of many small molecules, known as monomers. - It was the first reaction designed and carried out with the specific purpose of creating high molecular weight polymer molecules, as well as the first polymerization reaction whose results had been predicted by scientific theory. - This can be advantageous for cases such as hydroborating trienes to avoid polymerization. - For example, one of the common types of plastic, polyethylene, is the polymerization Chemical products of ethylene. - The effects of reactor type on dispersity depend largely on the relative timescales associated with the reactor, and with the polymerization type. - Microreactors are applied in combination with photochemistry, electrosynthesis, multicomponent reactions and polymerization . - The most heavily practiced reaction of alkenes, dienes included, is polymerization. - At this temperature there is practically no polymerization of the mineral compounds, creating a highly mobile liquid. - The manner in which polymerization is conducted is a highly evolved technology. - Unit operations involve a physical change or chemical transformation such as separation, crystallization, evaporation, filtration, polymerization, isomerization, and other reactions. - Historical Perspectives on Living Anionic Polymerization. - Living anionic polymerization was demonstrated by Szwarc and co workers in 1956. - Due to the nature of the polymerization mechanism, a high extent of reaction is required to achieve high molecular weight. - Polymerization of thiophene can be effected by a solution of ferric chloride in acetonitrile. - It is also used in cold vulcanization of rubbers, as polymerization catalyst for vegetable oils and for hardening soft woods. - Actin polymerization then propels the bacterium unidirectionally into the host cell membrane. - This kind of reaction is known as Vinyl group addition polymerization. - The Ziegler group suddenly had a polymerization procedure for ethylene superior to all existing processes. - One notable method of initiating a polymerization reaction involves the use of light as a stimulus. - For instance, alginate polymerization is started by calcium ions in the substrate, which diffuse into the liquified bioink and permit for the arrangement of a strong gel. - The active site is usually anionic but cationic coordination polymerization also exists. - White lead when cooked into linseed oil acts as a drying agent, accelerating the polymerization of the oil film. - Polymerization of ethylene oxide is an exothermic process. - The anode compartment is typically separated from the polymerization environment by a glass frit and a conductive gel. - Polymerization rate is controlled by monomer partitioning between the phases, particle nucleation, and adsorption and desorption of radicals. - Thermal degradation of the vinyl backbone can occur through several possible radical mechanisms, including the autooxidation of small amounts of iron and reactions between oxygen and residual impurities from polymerization at elevated temperature. - The resulting change in composition throughout the polymerization creates an inconsistent gradient along the polymer. - Application of a focused laser to the block results in polymerization only at the focal spot of the laser, where the intensity of the absorbed light is highest. - At this temperature, the enthalpy of polymerization matches the entropy gained by converting a large molecule into monomers. - In conventional polycondensation, the association constant is usually large that leads to a high degree of polymerization; however, a byproduct is observed. - However the feed and copolymer compositions can change as polymerization proceeds. - Combretastatin is a naturally occurring well known tubulin polymerization inhibitor. - At high frequencies it occurs in reactive intermediates, whereas at low frequencies polymerization happens mainly on surfaces. - After this frequency, inertial effects of colliding monomers inhibit polymerization. - Their mechanism of control over polymerization is proposed to be similar to the dithiuram disulfide iniferters. - The antimicrobial activity of the active agent may be either reduced or enhanced by polymerization. - He has a similar deck to the one Yugi Muto used in the original series, and is also able to fuse his monsters with the Spell, Polymerization. - The oxidizing agent acts as an initiator for polymerization.