<\/p>\n
– The ideal flow rate is one gallon of solvent<\/strong> per pound of garments per minute, depending on the size of the machine.\n<\/p>\n <\/p>\n – Turpentine is a solvent<\/strong> fluid got by distillationdistilling resin from live trees, mainly pines.\n<\/p>\n <\/p>\n – Solvation, commonly called dissolution, is the process of attraction and association of molecules of a solvent<\/strong> with molecules or ions of a solute.\n<\/p>\n <\/p>\n – The TLC plate should be removed before the solvent<\/strong> reaches the top of the plate.\n<\/p>\n <\/p>\n – In this discontinuous extraction process, the extraction solvent<\/strong> inside the boiling flask is evaporated and re-condensed in the distillation column above.\n<\/p>\n – During the wash cycle, the solvent<\/strong> in the chamber is filtered and then fed back into the chamber.\n<\/p>\n <\/p>\n – The authors also state that the cheletropic reaction doesn\u2019t seem to be influenced by either solvent<\/strong> acidity or basicity.\n<\/p>\n <\/p>\n – Choosing the correct solvent<\/strong> and temperature conditions is very important to make sure that the reaction happens.\n<\/p>\n <\/p>\n – It was first called the Process Solvent<\/strong> Company.\n<\/p>\n <\/p>\n – Until this time the cleaning is done in normal temperature, the solvent<\/strong> is never heated in dry cleaning process.\n<\/p>\n <\/p>\n – To enhance cleaning power, small amounts of detergent are added to the working solvent<\/strong> and are essential to its functionality.\n<\/p>\n <\/p>\n – Usually, this side-reaction may be limited by the volatile solvent<\/strong> vapors displacing air above the reaction mixture.\n<\/p>\n <\/p>\n – This pure solvent<\/strong><\/strong> rinse prevents discoloration caused by soil particles being absorbed back onto the garment surface from the “dirty” working solvent<\/strong><\/strong>.\n<\/p>\n <\/p>\n – Based on the results of a TLC experiment, a larger volume of mixture may be separated by another technique using a similar solvent<\/strong> system.\n<\/p>\n <\/p>\n – Modern machines recover approximately 99.99% of the solvent<\/strong> that was used.\n<\/p>\n <\/p>\n – Some textile dyes are “loose and will release dye during solvent<\/strong> immersion.\n<\/p>\n <\/p>\n – A solvent<\/strong> is usually a liquid, but can also be a solid or gas.\n<\/p>\n <\/p>\n – Fire concerns led William Joseph Stoddard, a dry cleaner from Atlanta, to develop Stoddard solvent<\/strong><\/strong> as a slightly less flammable alternative to gasoline-based solvent<\/strong><\/strong>s.\n<\/p>\n <\/p>\n – The exhausted warm air from the machine then passes through a chiller unit where solvent<\/strong><\/strong> vapors are condensed and returned to the distilled solvent<\/strong><\/strong> tank.\n<\/p>\n <\/p>\n – During the wash cycle, the chamber is filled approximately one-third full of solvent<\/strong> and begins to rotate, agitating the clothing.\n<\/p>\n <\/p>\n – The density of perchloroethylene is around 1.7 g\/cm\u00b3 at room temperature, and the sheer weight of absorbed solvent<\/strong> may cause the textile to fail under normal force during the extraction cycle unless the mesh bag provides mechanical support.\n<\/p>\n <\/p>\n – The solvent<\/strong> temperature is maintained at 30 degrees Celsius, as a higher temperature may damage it.\n<\/p>\n <\/p>\n – Soc.; 2006; 128 DOI: 10.1021\/ja055505+ With a reaction solvent<\/strong> such as toluene and a reaction temperature of 110\u00b0C, the yield increases going from methyl to isobutylmethyl to trimethylsilylmethyl.\n<\/p>\n <\/p>\n – The effect of the solvent<\/strong><\/strong> of the cheletropic reaction of 3,4-dimethyl-2,5-dihydrothiophen-1,1-dioxide was kinetically investigated in 14 solvent<\/strong><\/strong>s.\n<\/p>\n <\/p>\n – There are no government standards for how much solvent<\/strong> is allowed to remain in the fabric.\n<\/p>\n <\/p>\n – The flavours from plant material get into the solvent<\/strong> by putting in the plant material and letting it stay there for quite a time.\n<\/p>\n <\/p>\n – This solvent<\/strong> is called the mobile phase.\n<\/p>\n <\/p>\n – Working solvent<\/strong> from the washing chamber passes through several filtration steps before it is returned to the washing chamber.\n<\/p>\n <\/p>\n – The most common solvent<\/strong> in everyday life is water.\n<\/p>\n <\/p>\n – Chemists use it as a solvent<\/strong> for chemical reactions and in cromatography.\n<\/p>\n <\/p>\n – The condensed solvent<\/strong><\/strong><\/strong> is fed into a separator unit where any remaining water is separated from the solvent<\/strong><\/strong><\/strong> and then fed into the ‘clean solvent<\/strong><\/strong><\/strong>‘ tank.\n<\/p>\n <\/p>\n – It also can be made by reacting bromine in an organic solvent<\/strong> with ozone.\n<\/p>\n <\/p>\n – It has 25 to 40 per cent dye suspended in a solvent<\/strong> of “oil”.\n<\/p>\n <\/p>\n – It is used as a solvent<\/strong> for many reactions, especially in biochemistry.\n<\/p>\n <\/p>\n – Flux methods add a salt of relatively low melting point to the mixture to act as a high temperature solvent<\/strong> in which the desired reaction can take place.\n<\/p>\n <\/p>\n – The extraction cycle begins by draining the solvent<\/strong><\/strong> from the washing chamber and accelerating the basket to 350 to 450 rpm, causing much of the solvent<\/strong><\/strong> to spin free of the fabric.\n<\/p>\n <\/p>\n – This includes studying how different conditions such as temperature, pressure or solvent<\/strong> used affect the speed of a reaction.\n<\/p>\n <\/p>\n – Infusion is the process of getting plant chemicals into a solvent<\/strong> such as water, edible oiloil or alcohol.\n<\/p>\n <\/p>\n – Finally, the solvent<\/strong> passes through a polishing filter, which removes any soil not previously removed.\n<\/p>\n <\/p>\n – The amount of solute added to the solvent<\/strong> determines the concentration of the solution.\n<\/p>\n <\/p>\n – In enclosed machines, solvent<\/strong> recovered during the drying process is returned condensed and distilled.\n<\/p>\n <\/p>\n – Around this time many European countries and United States of America had established huge solvent<\/strong> extraction plants for recovering directly almost all the available oil in the oilseeds like Cottonseed and Soybean.\n<\/p>\n <\/p>\n – The reaction rate constants of the forward and reverse reaction in addition to the equilibrium constants were found to be linearly correlated with the E solvent<\/strong> polarity scale.\n<\/p>\n <\/p>\n – Much stricter controls on solvent<\/strong> emissions have ensured that all dry cleaning machines in the western world are now fully enclosed.\n<\/p>\n <\/p>\n – The clean solvent<\/strong><\/strong> is then returned to the working solvent<\/strong><\/strong> tank.\n<\/p>\n <\/p>\n – The first step is a button trap, which prevents small objects such as lint, fasteners, buttons, and coins from entering the solvent<\/strong> pump.\n<\/p>\n <\/p>\n – When no more solvent<\/strong> can be spun out, the machine starts the drying cycle.\n<\/p>\n <\/p>\n – In general, gas phase reactions and solution phase reactions of this type follow the same trends, even though in the first, solvent<\/strong> effects are dropped.\n<\/p>\n <\/p>\n – It is also used in reflux where it makes sure that the solvent<\/strong> used does not boil and go away.\n<\/p>\n <\/p>\n – It is also used as a solvent<\/strong> because it can dissolve many other chemicals and is not very toxic.\n<\/p>\n <\/p>\n – It measures the highest amount of substance mixed into a liquid solvent<\/strong> while they are both at equal amounts.\n<\/p>\n <\/p>\n – As the solvent<\/strong> evaporates, the adhesive hardens.\n<\/p>\n <\/p>\n – This results in high solvent<\/strong> recovery rates and reduced air pollution.\n<\/p>\n <\/p>\n – At times the solvent<\/strong> is used under pressure at temperatures higher than the normal boiling point.\n<\/p>\n <\/p>\n – Ether is used as a solvent<\/strong> by scientists for chemical reactions.\n<\/p>\n <\/p>\n – During the drying cycle, the garments are tumbled in a stream of warm air that circulates through the basket, evaporateevaporating any traces of solvent<\/strong> left after the spin cycle.\n<\/p>\n <\/p>\n – The solvent<\/strong> is called “perc” in the industry and “dry-cleaning fluid” by the public.\n<\/p>\n <\/p>\n – The solvent<\/strong> used is usually tetrachloroethylene.\n<\/p>\n <\/p>\n – As the solvent<\/strong> moves up the TLC plate by capillary action, the compound will also move.\n<\/p>\n <\/p>\n – Solvent<\/strong>s can also be used to solvent<\/strong> extractionextract soluble compounds from a mixture, the most common example is the brewing of coffee or tea with hot water.\n<\/p>\n <\/p>\n – The mobile phase is either a pure solvent<\/strong><\/strong> or a mixture of solvent<\/strong><\/strong>s.\n<\/p>\n <\/p>\n![\"In](\"https:\/\/englishteststore.net\/blog\/wp-content\/uploads\/2021\/09\/In-sentence-use-of-solvent.jpg\" "\\"In")
Example sentences of “solvent”:<\/h2>\n
- During the wash cycle, the solvent<\/strong> in the chamber is filtered and then fed back into the chamber.\r\n
- The authors also state that the cheletropic reaction doesn\u2019t seem to be influenced by either solvent<\/strong> acidity or basicity.\r\n
- Choosing the correct solvent<\/strong> and temperature conditions is very important to make sure that the reaction happens.\r\n
<\/pre>\nMore in-sentence examples of “solvent”:<\/h2>\n
- The effect of the solvent<\/strong><\/strong> of the cheletropic reaction of 3,4-dimethyl-2,5-dihydrothiophen-1,1-dioxide was kinetically investigated in 14 solvent<\/strong><\/strong>s.\r\n
- There are no government standards for how much solvent<\/strong> is allowed to remain in the fabric.\r\n
<\/pre>\n