How to use in-sentence of “deformation”:
+ The deformation can lead to a permanent shape change or structural failure if the material is not strong enough.
+ In spite of the extreme deformation of the serpentinite, Lawson declared the bridge perfectly safe.
+ This type of deformation is not reversible.
+ Hard thermosetting plastics, rubber, crystals, and ceramics have minimal plastic deformation ranges.
+ Other models look at the deformation of matter and solid bodies, because the characteristics of matter and solids are three dimensional.
+ GPS instruments have registered renewed deformation around the caldera in 2011 and 2012.
+ Endocrine disruptor resulting from chemical exposure has been linked to genital deformation in both sexes.
+ While wheels must deform the surface along their entire path, limbs only cause a small deformation at the point that the foot touches the ground.
Example sentences of “deformation”:
+ In engineering mechanics, deformation is a change in shape that is result of a force that influences the object.
+ This type of deformation is also not reversible.
+ Perhaps the material with the largest plastic deformation range is wet chewing gum, which can be stretched dozens of times its original length.
+ In engineering mechanics, deformation is a change in shape that is result of a force that influences the object.
+ This type of deformation is also not reversible.
+ Perhaps the material with the largest plastic deformation range is wet chewing gum, which can be stretched dozens of times its original length.
+ Structural loads or actions are forces, Deformation deformations, or components.
+ So the deformation is very slow.
+ The Toulouse deformation was caused by wrapping the head of the newborn, possible to protect it from damage.
+ Weisenhorn, A.L., et al., Deformation and height anomaly of soft surfaces studied with an AFM.
+ It is one aspect of the :en:Second_moment_of_areasecond moment of area linked through the perpendicular axis theorem where the planar second moment of area uses a beam’s cross-sectional shape to describe its resistance to plane parallel to its neutral axis, the polar second moment of area uses a beam’s cross-sectional shape to describe its resistance to deformation when a moment perpendicular to the beam’s neutral axis.
+ In reality, many materials which undergo large elastic and plastic deformations, such as steel, are able to absorb stresses which would cause brittle materials, such as glass, with minimal elastic and plastic deformation ranges, to break.
+ A break occurs after the material has reached the end of the elastic, and then plastic, deformation ranges.