How to use in-sentence of “combustion”:
– Familiar ones that use the expansion of heated gases include: the steam engine, the diesel engine, and the internal combustion enginegasoline engine in an automobile.
– It is widely used in transmission systems for road and rail vehicles with internal combustion engines.
– It is also found on internal combustion engines and variously fueled turbines, and in some modern striking clocks.
– This compression is used in gas engines, for example in the Diesel engine as in any internal combustion engine and in the steam engine.
– The two-stroke engine is an internal combustion engine.
– There are many different types of internal combustion engine.
– It is also known as a burner, combustion chamber or flame holder.
– They thought this explained the heat and light given off in combustion reactions.
Example sentences of “combustion”:
– Jean-Francois Marchet, Osprey autohistory, 1983 It was the company’s second internal combustion engine.
– Heat of combustion is a specialized form of reaction enthalpy because it is measured at standard conditions and is limited to one mole starting material.
– The propulsion can be done by an electric or a combustion engine.
– Also known as a “sparking plug”, it’s a device used in delivering the electric current to the air-fuel mixture in the combustion chamber.
– Nickel-based Superalloysuperalloys of rhenium are used in the combustion chambers, jet engines.
– The products of a combustion reaction are water and carbon dioxide gas as long as the reactants are oxygen and hydrocarbons.
– The units for heat of combustion can be varied, but are always reported as a unit of energy per mole or per unit of mass or volume depending on the method used to report the values.
– Rocket combustion is made by rocket fuel exploding out of the back of the rocket moving it up.
– A combustion potato gun will launch projectiles at a pressure of about 10-20 psi.
– Incomplete combustion occurs when the supply of air is limited, or poor.
– Typical “engines” in this meaning are steam engine and internal combustion engine, while typical “motors” are electric motor and hydraulic motor.
- Jean-Francois Marchet, Osprey autohistory, 1983 It was the company's second internal combustion engine.
- Heat of combustion is a specialized form of reaction enthalpy because it is measured at standard conditions and is limited to one mole starting material.
– It is one of the most used kinds of internal combustion engine.
– They can be either stationary or portable, can be single or multi-staged, and can be driven by electric motors or internal combustion engines.
– Some emergency vehicles are also allowed to use combustion engines.
– The terms heat of combustion and enthalpy of combustion are used interchangeably due to the First law of thermodynamics and the relationships between heat at constant pressure.
– The 14-bis used a 50-horsepower internal combustion engine, meaning an engine that burned its own fuel inside itself instead of using steam.
– The straight-eight engine or straight-8 is an internal combustion engine with 8 cylinders.
– The internal combustion engine is a mechanism for turning oil into motion.
– Rocket engines are internal combustion engines but they do not turn wheels.
– The other advantage is that used in a fuel cell or burned in a combustion engine as in a hydrogen car, the motor does not make pollution.
More in-sentence examples of “combustion”:
– Sulfur is released by the combustion of fossil fuels, as mentioned above, and is most prevalent as sulfur dioxide.
– Today its only common use is for ignition coils in internal combustion engines and in physics education to demonstrate induction.
– Karl Friedrich Benz was a German engine designer and car Mechanical engineeringengineer, generally regarded as the inventor of the internal combustion engine and petrol-powered automobile, and together with his wife Bertha Benz pioneering founder of the automobile manufacturer Mercedes-Benz.
– Heat of combustion measurements are most common for the combustion of organic hydrocarbons, compounds composed of carbon and hydrogen, but can include other atoms found in organic compounds such as nitrogen, phosphorous, sulfur and especially oxygen.
– Wedges can also be used to hold objects in place, such as Internal combustion engineengine parts, and doors.
– Still others can be powered by Internal combustion engines, steam, or water power.
– This can be reduced by making the combustion process more efficient, and by using various techniques to reduce the escape of harmful gases.
– A V12 engine often just called a V12 is an internal combustion engine with 12 cylinders.
– A true heat of combustion determination has liquid water at the end of the reaction due to the fact that the experiment is returned to the standard temperature of 25deg;C at which water condenses into liquid.
– Incomplete combustion also creates carbon monoxide, and more soot.
– Complete combustion needs a plentiful supply of air so that the elements in the fuel react fully with oxygen.
– There are two ways that a piston engine can transform combustion into motive power.
– A V6 engine, often just called a V6, is an internal combustion engine with six cylinders.
– A V10 engine, often just called a V10, is an internal combustion engine with 10 cylinders.
– External combustion engines, on the other hand, use the energy from burning fossil fuels to expand a gas or liquid and use the expansion to create motion.
– Gas turbines are internal combustion engines that work continuously, not by strokes.
– Fluidized bed combustion is a technology that burns crushed coal mixed with limestone to neutralize acidic sulfur compounds produced during combustion.
– They are also used in internal combustion engines as superchargers and turbochargers.
– Another type of internal combustion engine is the Wankel engine.
– This can be from an internal combustion engine, water driving a water wheel, or gas or water going through a turbine.
– In bombardier beetles these secretions are mixed with volatilesvolatile compounds and ejected by a small combustion with a loud popping sound and a cloud of hot and acrid gas.
– He was the first person to explain how combustion works.
– But then the internal combustion engine were greatly improved, and cars that used those engines could go much farther and faster than other cars.
– This was what most people believed caused combustion and corrosion.
– He was the first person to predict that emissions of carbon dioxide from the burning of fossil fuels and other combustion processes would cause global warming.
– Heat of combustion values are most widely used for determining if a substance is an effective fuel source.McMurry, J.E; Fay, R.C.; Robinson, J.K.
– Because they do not require any change or investment in stations nor much in vehicle design, diesel-electric vehicles are believed to be the most likely replacement for today’s internal combustion engine.
– A pulse jet engine is a very simple form of the internal combustion engine where the combustion happens in pulses.
– The carbon monoxide produced by its combustion reduces iron oxide to the iron product.
– He was also right about how it helps combustion work.
– Hydrogen can also be burned to make heat for steam turbines or internal combustion engines.
– Car combustion is gas burning and exploding in cylinders called pistons again and again to push them up and down, making the car move.
– This means that the car is powered by both a internal combustion enginegas engine and an electric motor.
– Heat of combustion is also called the enthalpy of combustion because the energy evolved from the combustion reaction results from the change in the overall enthalpy of the starting substance as it reacts completely with oxygen.
– The oil level dipstick is an example of a measuring dipstick found on most internal combustion engines.
– It is used to force air into an internal combustion engine.
– Complete combustion happens in a plentiful supply of oxygen.
– First, it was simply a vocal imitation of a two stroke, internal combustion engine.
– He is the person who explained combustion by oxidation.
– The third part of the ramjet is the combustor, also called the combustion chamber.
– An internal combustion engine is an engine in which combustion, or the fireburning of fuel, occurs on the inside.
– Common fuel types for internal combustion engines are petrol, diesel, autogas and alcohol.
– Any combustion engine follows the basic idea of converting fossil fuels into motion.
– A naturally aspirated engine is an internal combustion engine in which air intake depends solely on atmospheric pressure and which does not rely on air forced through a turbocharger or a supercharger.
– Burning fossil fuels in combustion therefore adds much carbon dioxide to the atmosphere.
- Sulfur is released by the combustion of fossil fuels, as mentioned above, and is most prevalent as sulfur dioxide.
- Today its only common use is for ignition coils in internal combustion engines and in physics education to demonstrate induction.
- Karl Friedrich Benz was a German engine designer and car Mechanical engineeringengineer, generally regarded as the inventor of the internal combustion engine and petrol-powered automobile, and together with his wife Bertha Benz pioneering founder of the automobile manufacturer Mercedes-Benz.
